Description
Model: HY-DY20 for W6/Z6/S6 and W8/Z8/S8 Reci Co2 Laser tubes
Alias: Co2 Laser Generator, Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply
Application
HY-DY20 Laser power supply is used for 120W,130W, 150W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.
Main Features
1. Good compatibility: HY-DY20 Power Supply is specially designed for Reci 130W,150W Laser tubes. And it also can be applicable to 120W,130W,150W Laser tubes manufactured by other factories.
2. High output Voltage and high output Current: when input AC220V and output current up to 35mA, the Voltage can be up to 50KV.
3. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 50KV.
4. This Power Supply has the” TEST” button which can test output laser manually.
5. Fast response speed: It can observably enlarge laser power and prolong Reci Laser tube’s service life.
Advantages
1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. The Laser power supply has output open circuit protection.
3. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.
Specification
Input |
Input Voltage | AC220V or AC110V(to be specified when placing order) | |
AC frequency | 47—440HZ | ||
Max Input Power | 1000W | ||
Max Iutput Curret | 10A | ||
Output | Max Output Voltage | DC 50KV | |
Max Output Current | DC 35MA | ||
Efficiency | ≥90﹪(full load) | ||
Mean Time Between Failure (MTBF) | ≥10000H | ||
Response Speed | ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current) | ||
Control Interface | TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) | ||
Pressure-proof | Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. | ||
Protection | can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell) | ||
Environmental | Operating Temperature:-10~40℃,Relative Humidity (RH):≤90﹪ | ||
Cooling Way | Force-Air Cooling (FAC) | ||
Dimension | L×W×H=314*203*84(mm) |
Technical Support
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser power supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and Laser tube wiring correct firstly, offline the control line and then press the red button TEST to test Laser tube out light or not, this method can be simple judgment power supply is working correctly.
Warranty
One year.
If the Laser power supply appeared problem during this period, we can send Free Pars for your repairing.