Description
Model: HY-C150-Y3 for 100w,130w,150w CMA Co2 Laser Cutting Machine
Alias: Co2 Laser Generator,Co2 Laser Source,Co2 Laser Device,High Voltage Power Supply
Application
HY-C150-Y3 Laser power supply is used for 100W, 130W, 150W CMA Yueming Laser Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect.
Main Features
1. HY-C150-Y3 with DB9 pin, it is controlled by 0 ~ 3.3v analog signals or PWM control signal,
special designed for 100W,130W,150W CMA laser cutting machine manufactured by Yueming factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 50KV.
3. You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability; the Sculpring Type has a quick response speed and good engraving effect.
4. This Power Supply has the” TEST” button which can test output laser manually.
5. The Laser power supply has high Output Power, good stability, this can prolong Laser tubes service life.
Advantages
1. Easy Control: The start and stop of laser can be easily controlled by TTL level.either 0 ~ 3.3v analog signals or PWM control signal can control the laser power.
2. The Laser power supply has output open circuit protection.
3. This Laser power supply has TTL signal indication, water through signal indication and laser output indication.
4. The power has feedback interface, can be used for closed-loop control, also can be used for testing the Laser tube working current.
Specification:
Input | Input Voltage | AC198-AC250V or AC99V-AC125V(Pls speciy when placing order) | |
AC frequency | 47—440HZ | ||
Max Input Power | 1000W | ||
Max Input Current | 10A | ||
Output | Max Output Voltage | DC 50KV | |
Max Output Current | DC 38mA | ||
Efficiency | ≥90﹪(full load) | ||
Mean Time Between Failure (MTBF) | ≥10000H | ||
Response Speed | ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current) | ||
Control Interface | TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) | ||
Pressure-proof | Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. | ||
Protection | can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell) | ||
Environmental | Operating Temperature:-10~40℃,Relative Humidity (RH):≤90﹪ | ||
Cooling Way | Force-Air Cooling (FAC) | ||
Dimension | L×W×H=325*240*97(mm) |
Technical Support
1. All our item is pass the ISO9001 and CE quality Certification.
2. We are the manufactory of the Co2 Laser power supply, and have strict quality control system, so that we can supply the best quality products with lowest prices for our client.
3. We have a professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure the power supply and Laser tube wiring correct firstly, offline the control line and then press the red button TEST to test Laser tube out light or not, this method can be simple judgment power supply is working correctly.
Warranty
One year.
If the Laser power supply appeared problem during this period, we can send Free Pars for your repairing.